@@ -315,18 +315,18 @@ This does cost money If you don't have unlimited cloud tokens. With my education
Once it starts generating this will pop up. These are the finished results. The generation process can take about an hour.
## Full redesign
I started a full re-design from the ground up because the old design was too cluttered and it didn't scale properly anymore parametricly. I first started off with the first sketch from the original design.
I started a full re-design from the ground up because the old design was too cluttered and it didn't scale properly anymore parametrically. I first started off with the first sketch from the original design.
From there I extruded the body Symmetricly so they are always the exact same size on both sides.
From there I extruded the body symmetrically so they are always the exact same size on both sides.
I made an sketch on the side of the drone making place for the LED matrix and alls it's cables
I made a sketch on the side of the drone making place for the LED matrix and all its cables
After that I used the mirror tool to mirror the features over to the otehr side using the axises as the tool since they are dead centre. I did the same for the holes for the wiring
After that I used the mirror tool to mirror the features over to the other side using the axes as the tool since they are dead centre. I did the same for the holes for the wiring
After that I dragged the motor arm design into the designing window and jointed it to the body of the robot.
